Product Maintenance and Maintenance Skills
1.Compressor maintenance and maintenance （1） Check refrigerant level regularly A low refrigerant level may cause the compressor to overheat and damage. You are advised to check the refrigerant level every six months or every time you replace the air conditioner filter element. Level check requires professional personnel, please contact the authorized maintenance station. （2）Clean heat sink and condenser Regularly clean the dust and debris on the heat sink and condenser to ensure good heat dissipation effect. It can be cleaned using a soft brush or compressed air. （3）Check belt tension Regularly check the tension of the compressor belt, too loose or too tight belt will lead to abnormal operation of the compressor. Belt tension should be kept within the manufacturer’s recommended range. （4）Pay attention to abnormal noise and vibration If abnormal noise or vibration occurs during operation, stop using the compressor immediately and contact professional personnel. （5）Use genuine refrigerant and freezing oil The use of non-genuine refrigerant and refrigerant oil can cause compressor damage and affect air conditioning system performance. 2.starter maintenance and maintenance （1） Check the battery status regularly Insufficient battery voltage will cause the starter to operate weak, it is recommended to check the battery voltage every six months or each maintenance. The battery voltage should be above 12.4V. （2）Check the terminal Regularly check whether the starter terminal is loose or corroded, and tighten or replace it in time. （3）Pay attention to the starting time Each starting time should not exceed 10 seconds, and the continuous starting interval time should be greater than 15 seconds. （4）Avoid frequent starts Frequent starting may cause the starter to overheat. It is recommended that the interval between starting is greater than 15 seconds. （5）Regular cleaning and lubrication Clean the dust on the surface of the starter regularly and lubricate with lithium grease if necessary. 3.Generator maintenance and maintenance （1）Check belt tension regularly Regularly check the tension of the generator belt, too loose or too tight belt will affect the performance of the generator. Belt tension should be kept within the manufacturer’s recommended range. （2）Check the terminal Periodically check whether the generator terminal is loose or corroded, and tighten or replace it in time. （3）Pay attention to abnormal noise If abnormal noise is found during the operation of the generator, stop using it immediately and contact a professional to check. （4） Regular cleaning and lubrication Clean the dust on the generator surface regularly, and use lithium grease to lubricate if necessary. （5）Pay attention to battery voltage Check the battery voltage regularly, too high or too low voltage can affect the generator performance. It is recommended that the battery voltage be between 13.5 and 14.5V. Please note: The above suggestions are for reference only. For specific maintenance methods, please refer to your vehicle user manual or consult professional maintenance personnel. Improper operation may cause damage to the device. It is recommended that professionals repair and maintain the device. Thank you for your trust and support for our products!